Your streamlined solution for Part L Extension Compliance, ensuring your building projects meet regulatory standards with automated Average U-value calculations and clear compliance reports.

SAPPER is a free AI-powered SAP (Standard Assessment Procedure) compliance calculator for UK Building Regulations Part L. It automates data extraction from architectural PDF drawings, calculates thermal bridges, checks Part L compliance using Average U-value or Whole House methods, and generates professional compliance reports. Built by CoreLogic Ai Ltd.

What are the Part L 2021 U-value limits for extensions?

Part L 2021 (England, from June 2022) extension limiting U-values: External walls 0.18 W/m²K, Roofs 0.15 W/m²K, Floors 0.18 W/m²K, Windows 1.4 W/m²K, Doors 1.4 W/m²K, Rooflights 2.2 W/m²K. These are used as notional values in the Average U-value compliance calculation.

How does AI extract SAP data from drawings?

SAPPER uses a multi-pass AI extraction system: Pass 1 classifies drawing types (plans, elevations, sections) and detects scales. Pass 2 extracts dimensional data (floor areas, perimeters, storey heights) from annotations. Pass 3 analyses every elevation for windows, doors, rooflights with orientation detection. Results are validated with sanity checks and achieve 85-95% accuracy.

What are thermal bridge psi-values?

Psi-values (ψ-values) measure additional heat loss at building junctions in W/mK (Watts per metre Kelvin). Common UK junctions include E2 (lintels, accredited ψ=0.20), E3 (sills, ψ=0.04), E4 (jambs, ψ=0.04), E5 (ground floor, ψ=0.12), E10/E11 (eaves, ψ=0.04-0.06). RCD (Recognised Construction Details) values are 20-40% lower for brick/block masonry constructions.

What is the condensation risk f-factor?

The f-factor (fRsi) is the surface temperature factor used to assess condensation and mould growth risk at thermal bridges per BR 497. f ≥ 0.75 = low risk (acceptable), f 0.65-0.75 = medium risk (review needed), f < 0.65 = high risk (mould growth likely, design modification required). Calculated as fRsi = (Tsi - Te) / (Ti - Te).

Is SAPPER free to use?

Yes. SAPPER is completely free with no feature limitations, no credit card required, and no hidden costs. Part L calculator, AI extraction, thermal bridging, room in roof calculator, and PDF reports are all included at no charge.

Room in Roof Calculator

Accurate calculations for loft conversions and rooms in roof spaces

🏠 Room in Roof Calculator

Automatic calculation of average storey height and thermal bridges

1. Select Roof Construction Scenario

Selected: Flat ceiling with insulation at joist level + sloping ceilings + insulated stud walls to void spaces

2. Enter Dimensions (from drawings)

Flat Ceiling Area (m²)

Flat Ceiling Height (m)

Sloping Ceiling Floor Area (m²)

Ridge Height Above Flat Ceiling (m)

Building Width (m)

Building Length (m)

Roof Pitch (degrees)

📚 About This Tool

This calculator implements the Elmhurst methodology for room in roof assessments. It correctly calculates average storey height using volume calculations, accounts for sloping ceiling areas, and identifies all required thermal bridge junctions based on your construction scenario. The calculated values are automatically saved to your SAP project.