Your streamlined solution for Part L Extension Compliance, ensuring your building projects meet regulatory standards with automated Average U-value calculations and clear compliance reports.

SAPPER is a free AI-powered SAP (Standard Assessment Procedure) compliance calculator for UK Building Regulations Part L. It automates data extraction from architectural PDF drawings, calculates thermal bridges, checks Part L compliance using Average U-value or Whole House methods, and generates professional compliance reports. Built by CoreLogic Ai Ltd.

What are the Part L 2021 U-value limits for extensions?

Part L 2021 (England, from June 2022) extension limiting U-values: External walls 0.18 W/m²K, Roofs 0.15 W/m²K, Floors 0.18 W/m²K, Windows 1.4 W/m²K, Doors 1.4 W/m²K, Rooflights 2.2 W/m²K. These are used as notional values in the Average U-value compliance calculation.

How does AI extract SAP data from drawings?

SAPPER uses a multi-pass AI extraction system: Pass 1 classifies drawing types (plans, elevations, sections) and detects scales. Pass 2 extracts dimensional data (floor areas, perimeters, storey heights) from annotations. Pass 3 analyses every elevation for windows, doors, rooflights with orientation detection. Results are validated with sanity checks and achieve 85-95% accuracy.

What are thermal bridge psi-values?

Psi-values (ψ-values) measure additional heat loss at building junctions in W/mK (Watts per metre Kelvin). Common UK junctions include E2 (lintels, accredited ψ=0.20), E3 (sills, ψ=0.04), E4 (jambs, ψ=0.04), E5 (ground floor, ψ=0.12), E10/E11 (eaves, ψ=0.04-0.06). RCD (Recognised Construction Details) values are 20-40% lower for brick/block masonry constructions.

What is the condensation risk f-factor?

The f-factor (fRsi) is the surface temperature factor used to assess condensation and mould growth risk at thermal bridges per BR 497. f ≥ 0.75 = low risk (acceptable), f 0.65-0.75 = medium risk (review needed), f < 0.65 = high risk (mould growth likely, design modification required). Calculated as fRsi = (Tsi - Te) / (Ti - Te).

Is SAPPER free to use?

Yes. SAPPER is completely free with no feature limitations, no credit card required, and no hidden costs. Part L calculator, AI extraction, thermal bridging, room in roof calculator, and PDF reports are all included at no charge.

Stair Master

DXF to Full-Size PDF for Large Format Printing

Upload DXF files from any CAD software. Stair Master parses the geometry, calculates dimensions, and generates a print-ready PDF at exactly 1:1 scale with the custom page size your printer needs.

1Set Your Roll Width

Roll Width (physical width loaded in your printer)

mm custom

Printer Margin (per side)

The unprintable strip at each edge of the roll. Default 5mm per side.

You only need to set this once — it's saved to your account.

2Upload Your DXF Files

Drag & drop DXF files here, or click to browse

Multiple files supported · .dxf format (AutoCAD DXF AC1015+)

⚠ Files must contain POLYLINE entities with real-world coordinates in millimetres. Most CAD exports do this by default. Export as DXF (not DWG) with drawing units set to millimetres.

Troubleshooting